Restart-Based Fault-Tolerance: System Design and Schedulability Analysis

Embedded systems in safety-critical environments are continuously required to deliver more performance and functionality, while expected to provide verified safety guarantees. Nonetheless, platform-wide software verification (required for safety) is often expensive. Therefore, design methods that enable utilization of components such as real-time operating systems (RTOS), without requiring their correctness to guarantee safety, is necessary. In this paper, we propose a design approach to deploy safe-by-design embedded systems. To attain this goal, we rely on a small core of verified software to handle faults in applications and RTOS and recover from them while ensuring that timing constraints of safety-critical tasks are always satisfied. Faults are detected by monitoring the application timing and fault-recovery is achieved via full platform restart and software reload, enabled by the short restart time of embedded systems. Schedulability analysis is used to ensure that the timing constraints of critical plant control tasks are always satisfied in spite of faults and consequent restarts. We derive schedulability results for four restart-tolerant task models. We use a simulator to evaluate and compare the performance of the considered scheduling models

A real-time scratchpad-centric OS for multi-core embedded systems

Multicore processors have been increasing in development by the industry to meet the ever-growing processing requirements of various applications because these processors offer benefits such as reduced power consumption, more processing power and efficient parallel task execution for general purpose work- loads. However, in hard real time systems where predictability is a key aspect, the average performance of these multicore processors is even worse than the scenarios in which the same task set is executed on a single core processor. This performance degradation is due to the fact that the multicore systems have shared resources such as DRAM, BUS and caches which make the system highly unpredictable. One way to achieve predictability in such systems is to serialize the access of the cores to the shared resources such that there is no contention. Another widely emerging approach is the integration of the scratchpad memory. Using scratchpad, at run time, the code and data for the requested task is made available in the scratchpad and contention can be avoided. In this thesis, we approach the problem of shared resource arbitration at an OS-level and propose a novel scratchpad centric OS design for multi-core platforms. In the proposed OS, the predictable usage of shared resources across multiple cores represents a central design-time goal. Hence, we show (i) how contention-free execution of real-time tasks can be achieved on scratchpad-based architectures, and (ii) how a separation of application logic and I/O operations in the time domain can be enforced. To validate the proposed design, we implemented the proposed OS using a commercial-off-the-shelf (COTS) platform. Experiments show that this novel design delivers predictable temporal behavior to hard real-time tasks, and it improves performance up to 2.1x compared to traditional approaches

Designing Mixed Criticality Applications on Modern Heterogeneous MPSoC Platforms

Multiprocessor Systems-on-Chip (MPSoC) integrating hard processing cores with programmable logic (PL) are becoming increasingly common. While these platforms have been originally designed for high performance computing applications, their rich feature set can be exploited to efficiently implement mixed criticality domains serving both critical hard real-time tasks, as well as soft real-time tasks. In this paper, we take a deep look at commercially available heterogeneous MPSoCs that incorporate PL and a multicore processor. We show how one can tailor these processors to support a mixed criticality system, where cores are strictly isolated to avoid contention on shared resources such as Last-Level Cache (LLC) and main memory. In order to avoid conflicts in last-level cache, we propose the use of cache coloring, implemented in the Jailhouse hypervisor. In addition, we employ ScratchPad Memory (SPM) inside the PL to support a multi-phase execution model for real-time tasks that avoids conflicts in shared memory. We provide a full-stack, working implementation on a latest-generation MPSoC platform, and show results based on both a set of data intensive tasks, as well as a case study based on an image processing benchmark application

E-WarP: a system-wide framework for memory bandwidth profiling and management

The proliferation of multi-core, accelerator-enabled embedded systems has introduced new opportunities to consolidate real-time systems of increasing complexity. But the road to build confidence on the temporal behavior of co-running applications has presented formidable challenges. Most prominently, the main memory subsystem represents a performance bottleneck for both CPUs and accelerators. And industry-viable frameworks for full-system main memory management and performance analysis are past due. In this paper, we propose our Envelope-aWare Predictive model, or E-WarP for short. E-WarP is a methodology and technological framework to: (1) analyze the memory demand of applications following a profile-driven approach; (2) make realistic predictions on the temporal behavior of workload deployed on CPUs and accelerators; and (3) perform saturation-aware system consolidation. This work aims at providing the technological foundations as well as the theoretical grassroots for truly workload-aware analysis of real-time systems. We provide a full implementation of our techniques on a commercial platform (NXP S32V234) and make two key observations. First, we achieve, on average, a 6% overprediction on the runtime of bandwidth-regulated applications. Second, we experimentally validate that the calculated bounds hold if the main memory subsystem operates below saturation.https://cs-people.bu.edu/rmancuso/files/papers/EWarP_RTSS20_final.pdfAccepted manuscrip

A 3G/WiFi-enabled 6LoWPAN-based u-healthcare system for ubiquitous real-time monitoring and data logging

Ubiquitous healthcare (U-healthcare) systems are expected to offer flexible and resilient high-end technological solutions enabling remote monitoring of patients health status in real-time and provisioning of feedback and remote actions by healthcare providers. In this paper, we present a 6LowPAN based U-healthcare platform that contributes to the realization of the above expectation. The proposed system comprises two sensor nodes sending temperature data and ECG signals to a remote processing unit. These sensors are being assigned an IPv6 address to enable the Internet-of-Things (IoT) functionality. A 6LowPAN-enabled edge router, connected to a PC, is serving as a base station through a serial interface, to collect data from the sensor nodes. Furthermore, a program interfacing through a Serial-Line-Internet-Protocol (SLIP) and running on the PC provides a network interface that receives IPv6 packets from the edge router. The above system is enhanced by having the application save readings from the sensors into a file that can be downloaded by a remote server using a free Cloud service such as UbuntuOne. This enhancement makes the system robust against data loss especially for outdoor healthcare services, where the 3G/4G connectivity may get lost because of signal quality fluctuations. The system provided a proof of concept of successful remote U-healthcare monitoring illustrating the IoT functionality and involving 3G/4G connectivity while being enhanced by a cloud-based backup

A real-time virtio-based framework for predictable inter-VM communication

Ensuring real-time properties on current heterogeneous multiprocessor systems on a chip is a challenging task. Furthermore, online artificial intelligent applications –which are routinely deployed on such chips– pose increasing pressure on the memory subsystem that becomes a source of unpredictability. Although techniques have been proposed to restore independent access to memory for concurrently executing virtual machines (VM), providing predictable inter-VM communication remains challenging. In this work, we tackle the problem of predictably transferring data between virtual machines and virtualized hardware resources on multiprocessor systems on chips under consideration of memory interference. We design a "broker-based" real-time communication framework for otherwise isolated virtual machines, provide a virtio-based reference implementation on top of the Jailhouse hypervisor, assess its overheads for FreeRTOS virtual machines, and formally analyze its communication flow schedulability under consideration of the implementation overheads. Furthermore, we define a methodology to assess the maximum DRAM memory saturation empirically, evaluate the framework's performance and compare it with the theoretical schedulability.Accepted manuscrip

Impact of opioid-free analgesia on pain severity and patient satisfaction after discharge from surgery: multispecialty, prospective cohort study in 25 countries

Background: Balancing opioid stewardship and the need for adequate analgesia following discharge after surgery is challenging. This study aimed to compare the outcomes for patients discharged with opioid versus opioid-free analgesia after common surgical procedures.Methods: This international, multicentre, prospective cohort study collected data from patients undergoing common acute and elective general surgical, urological, gynaecological, and orthopaedic procedures. The primary outcomes were patient-reported time in severe pain measured on a numerical analogue scale from 0 to 100% and patient-reported satisfaction with pain relief during the first week following discharge. Data were collected by in-hospital chart review and patient telephone interview 1 week after discharge.Results: The study recruited 4273 patients from 144 centres in 25 countries; 1311 patients (30.7%) were prescribed opioid analgesia at discharge. Patients reported being in severe pain for 10 (i.q.r. 1-30)% of the first week after discharge and rated satisfaction with analgesia as 90 (i.q.r. 80-100) of 100. After adjustment for confounders, opioid analgesia on discharge was independently associated with increased pain severity (risk ratio 1.52, 95% c.i. 1.31 to 1.76; P < 0.001) and re-presentation to healthcare providers owing to side-effects of medication (OR 2.38, 95% c.i. 1.36 to 4.17; P = 0.004), but not with satisfaction with analgesia (beta coefficient 0.92, 95% c.i. -1.52 to 3.36; P = 0.468) compared with opioid-free analgesia. Although opioid prescribing varied greatly between high-income and low- and middle-income countries, patient-reported outcomes did not.Conclusion: Opioid analgesia prescription on surgical discharge is associated with a higher risk of re-presentation owing to side-effects of medication and increased patient-reported pain, but not with changes in patient-reported satisfaction. Opioid-free discharge analgesia should be adopted routinely

Global age-sex-specific mortality, life expectancy, and population estimates in 204 countries and territories and 811 subnational locations, 1950–2021, and the impact of the COVID-19 pandemic: a comprehensive demographic analysis for the Global Burden of Disease Study 2021

Background: Estimates of demographic metrics are crucial to assess levels and trends of population health outcomes. The profound impact of the COVID-19 pandemic on populations worldwide has underscored the need for timely estimates to understand this unprecedented event within the context of long-term population health trends. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 provides new demographic estimates for 204 countries and territories and 811 additional subnational locations from 1950 to 2021, with a particular emphasis on changes in mortality and life expectancy that occurred during the 2020–21 COVID-19 pandemic period. Methods: 22 223 data sources from vital registration, sample registration, surveys, censuses, and other sources were used to estimate mortality, with a subset of these sources used exclusively to estimate excess mortality due to the COVID-19 pandemic. 2026 data sources were used for population estimation. Additional sources were used to estimate migration; the effects of the HIV epidemic; and demographic discontinuities due to conflicts, famines, natural disasters, and pandemics, which are used as inputs for estimating mortality and population. Spatiotemporal Gaussian process regression (ST-GPR) was used to generate under-5 mortality rates, which synthesised 30 763 location-years of vital registration and sample registration data, 1365 surveys and censuses, and 80 other sources. ST-GPR was also used to estimate adult mortality (between ages 15 and 59 years) based on information from 31 642 location-years of vital registration and sample registration data, 355 surveys and censuses, and 24 other sources. Estimates of child and adult mortality rates were then used to generate life tables with a relational model life table system. For countries with large HIV epidemics, life tables were adjusted using independent estimates of HIV-specific mortality generated via an epidemiological analysis of HIV prevalence surveys, antenatal clinic serosurveillance, and other data sources. Excess mortality due to the COVID-19 pandemic in 2020 and 2021 was determined by subtracting observed all-cause mortality (adjusted for late registration and mortality anomalies) from the mortality expected in the absence of the pandemic. Expected mortality was calculated based on historical trends using an ensemble of models. In location-years where all-cause mortality data were unavailable, we estimated excess mortality rates using a regression model with covariates pertaining to the pandemic. Population size was computed using a Bayesian hierarchical cohort component model. Life expectancy was calculated using age-specific mortality rates and standard demographic methods. Uncertainty intervals (UIs) were calculated for every metric using the 25th and 975th ordered values from a 1000-draw posterior distribution. Findings: Global all-cause mortality followed two distinct patterns over the study period: age-standardised mortality rates declined between 1950 and 2019 (a 62·8% [95% UI 60·5–65·1] decline), and increased during the COVID-19 pandemic period (2020–21; 5·1% [0·9–9·6] increase). In contrast with the overall reverse in mortality trends during the pandemic period, child mortality continued to decline, with 4·66 million (3·98–5·50) global deaths in children younger than 5 years in 2021 compared with 5·21 million (4·50–6·01) in 2019. An estimated 131 million (126–137) people died globally from all causes in 2020 and 2021 combined, of which 15·9 million (14·7–17·2) were due to the COVID-19 pandemic (measured by excess mortality, which includes deaths directly due to SARS-CoV-2 infection and those indirectly due to other social, economic, or behavioural changes associated with the pandemic). Excess mortality rates exceeded 150 deaths per 100 000 population during at least one year of the pandemic in 80 countries and territories, whereas 20 nations had a negative excess mortality rate in 2020 or 2021, indicating that all-cause mortality in these countries was lower during the pandemic than expected based on historical trends. Between 1950 and 2021, global life expectancy at birth increased by 22·7 years (20·8–24·8), from 49·0 years (46·7–51·3) to 71·7 years (70·9–72·5). Global life expectancy at birth declined by 1·6 years (1·0–2·2) between 2019 and 2021, reversing historical trends. An increase in life expectancy was only observed in 32 (15·7%) of 204 countries and territories between 2019 and 2021. The global population reached 7·89 billion (7·67–8·13) people in 2021, by which time 56 of 204 countries and territories had peaked and subsequently populations have declined. The largest proportion of population growth between 2020 and 2021 was in sub-Saharan Africa (39·5% [28·4–52·7]) and south Asia (26·3% [9·0–44·7]). From 2000 to 2021, the ratio of the population aged 65 years and older to the population aged younger than 15 years increased in 188 (92·2%) of 204 nations. Interpretation: Global adult mortality rates markedly increased during the COVID-19 pandemic in 2020 and 2021, reversing past decreasing trends, while child mortality rates continued to decline, albeit more slowly than in earlier years. Although COVID-19 had a substantial impact on many demographic indicators during the first 2 years of the pandemic, overall global health progress over the 72 years evaluated has been profound, with considerable improvements in mortality and life expectancy. Additionally, we observed a deceleration of global population growth since 2017, despite steady or increasing growth in lower-income countries, combined with a continued global shift of population age structures towards older ages. These demographic changes will likely present future challenges to health systems, economies, and societies. The comprehensive demographic estimates reported here will enable researchers, policy makers, health practitioners, and other key stakeholders to better understand and address the profound changes that have occurred in the global health landscape following the first 2 years of the COVID-19 pandemic, and longer-term trends beyond the pandemic

Evaluating memory subsystem of configurable heterogeneous MPSoC

This paper presents the evaluation of the memory subsystem of the Xilinx Ultrascale+ MPSoC. The characteristics of various memories in the system are evaluated using carefully instrumented micro-benchmarks. The impact of micro-architectural features like caches, prefetchers and cache coherency are measured and discussed. The impact of multi-core contention on shared memory resources is evaluated. Finally, proposals are made for the design of mixed-criticality real-time applications on this platform.Accepted manuscrip